stanlsimon
Mechanical
We are looking for information and or assistance in setting up a Haber Bosch type process to produce anhydrous ammonia. Does anyone have a suggestion on where to start?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
haber bosch process
- Thread starter stanlsimon
- Start date
- Status
stanlsimon:
You could start by contacting one of these large engineering and construction companies that specialize in chemical, petrochemical and refinery projects (arranged in alphabetical order), many of whom have offices in Houston, Texas:
ABB Lummus; Aker Kvaerner; Bechtel; Fluor Daniels; Foster Wheeler; Jacobs; Kellogg Brown and Root (KBR); Parsons; Raytheon; and Shaw Stone &Webster ... as well as many others in Europe, Japan and Korea.
I don't know how much you already know about ammonia production, but perhaps it would be helpful if your read this article:
Milton Beychok
(Visit me at www.air-dispersion.com)
.
You could start by contacting one of these large engineering and construction companies that specialize in chemical, petrochemical and refinery projects (arranged in alphabetical order), many of whom have offices in Houston, Texas:
ABB Lummus; Aker Kvaerner; Bechtel; Fluor Daniels; Foster Wheeler; Jacobs; Kellogg Brown and Root (KBR); Parsons; Raytheon; and Shaw Stone &Webster ... as well as many others in Europe, Japan and Korea.
I don't know how much you already know about ammonia production, but perhaps it would be helpful if your read this article:
Milton Beychok
(Visit me at www.air-dispersion.com)
.
Or maybe Haldor Topsoe:
One of the main catalysts providers.
Best regards
Morten
One of the main catalysts providers.
Best regards
Morten
- Status
Similar threads
- Locked
- Question
- Locked
- Question