Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

H2S Stripping of Crude Oil...with sparging???

Status
Not open for further replies.
processeng2014

processeng2014

Chemical
Joined
May 21, 2014
Messages
19
Location
US
I have an idea to strip H2S out of crude by bubbling sweet gas through spargers that are placed every 5 ft in a very long vessel. The H2S must be reduced from around 75 ppm to 10 ppm. Ideally we would like to not use any sort of H2S stripping column as it may be overkill..

Has anyone ever seen this done operationally? Would there be problems with foaming? Any other suggestions on how we could meet the H2S spec?

Thanks
 
Status
Not open for further replies.

Similar threads

MMED
  • Locked
  • Question Question
Crude Oil Heater
Replies
5
Views
6K
MMED
MMED
MMED
  • Locked
  • Question Question
De-mulsifier efficiency and Oil recovery
Replies
5
Views
5K
georgeverghese
georgeverghese
S.G
  • Locked
  • Question Question
Crude Oil Blending
Replies
0
Views
313
S.G
S.G
S.G
  • Locked
  • Question Question
H2S Partial Pressure.
Replies
10
Views
1K
SJones
SJones
T.R
  • Locked
  • Question Question
Crude oil Yield discrepency
Replies
3
Views
420
1503-44
1503-44

Part and Inventory Search

Sponsor

Back
Top