Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gunite and Single Pipe system for Sealine

Status
Not open for further replies.

Vinzzzz

Materials
Joined
Mar 24, 2009
Messages
21
Location
IT
Hi i'm vincenzo a material engineer and i'm finding systems for two sealines:
- the first is 10"
- the second 12".

I'm Trying to find some insulating system used for sealines as single pipe configuration.
I have found also some info about five layer system done by the industry socotherm.
Someone can help me to find some system about gunite and polymers for sealine single pipe configuration?
i want to verify this system because i think that gunite is heavier than the single pipe insulated with polymers. this can allow pipe to be submerged by water.
The depth is 110m under the sea.

Thanks for all and best regards.

Vincenzo
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top