-
1
- #1
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
GUI detected error 1
- Thread starter kize
- Start date
Hmmmm.....this is well known problem related with hardware
acceleration. I suppose that you have allready set off the hardware acceleration in the graphicsConfig.env file. If you have not allready do it just open the file and set
the line
hardwareAcceleration=OFF
Your last move is to turn also OFF your hardware acceleration from the Display Properties. Go to your Desktop
right click to open display properties. Click from Settings tab Advanced. Choose Troubleshooting and set hardware Acceleration to none. I hope this will resolve your problem.
Read also ABAQUS documentation for posiible additional settings
Bobos
acceleration. I suppose that you have allready set off the hardware acceleration in the graphicsConfig.env file. If you have not allready do it just open the file and set
the line
hardwareAcceleration=OFF
Your last move is to turn also OFF your hardware acceleration from the Display Properties. Go to your Desktop
right click to open display properties. Click from Settings tab Advanced. Choose Troubleshooting and set hardware Acceleration to none. I hope this will resolve your problem.
Read also ABAQUS documentation for posiible additional settings
Bobos
- Status
