Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ground vibration limits around residential areas 2

Status
Not open for further replies.

flummoxed2002

Mechanical
Joined
Sep 10, 2009
Messages
9
Hello,

I am trying to locate the acceptable limit per Canadian code for ground vibration acceleration in m/sec^2 in the 50 -160 Hz range. I'm looking to asses vibration levels created by subway trains passing through a residential area.

Thank you in advance for the help.
 
Look at data and guidelines from Caltrans. It addresses this in particular, though not Canadian.
 
Although not Canadian, the British Standard BS7385-2 Evaluation and measurement for vibration in buildings recommends a value of 15mm/s at 4Hz increasing to 20mm/s at 40Hz and above, for cosmetic damage

Kieran
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top