0
05735620d
Guest
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
- Thread starter
- #2
0
05735620d
Guest
Topic: Great confuse & caois in CONTACT ANALYSIS
I am doing a contact analysis with 3 parts
1. a pillar of stainless steel 5mm diameter
2. a main body of PVC which have a rail to locate the pillar
3. a pusher of PVC which is used to push the pillar indirectly
I add force to the pusher and fixed the main body, between each part I added ocntact surfaces.
I am going to study wehter the part 2 or 3 deform and how the mechanism fail....
however...the result is ....the steel pillar deform, it is out of expectation...
Could anyone explan this situation??
really don't why PVC not deform but steel deform.
I am doing a contact analysis with 3 parts
1. a pillar of stainless steel 5mm diameter
2. a main body of PVC which have a rail to locate the pillar
3. a pusher of PVC which is used to push the pillar indirectly
I add force to the pusher and fixed the main body, between each part I added ocntact surfaces.
I am going to study wehter the part 2 or 3 deform and how the mechanism fail....
however...the result is ....the steel pillar deform, it is out of expectation...
Could anyone explan this situation??
really don't why PVC not deform but steel deform.
Similar threads
- Locked
- Question