Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
GRAY DIMENSIONS IN DRAWING
- Thread starter luckym
- Start date
If your options are on default dimension colors gray means non assosiative dimensions. Dimension does not have 3D element reference.
On what level you are running CATIA? In V5R7 dimensions were gray when dimensioning drawing elements generated from mirrored 3D elements.
On what level you are running CATIA? In V5R7 dimensions were gray when dimensioning drawing elements generated from mirrored 3D elements.
- Thread starter
- #3
Thank for reply.
I run on V5R9
and i resolve this problem....
when i turn off icon
"display the various types of dimensions in different and customizable colors" all is ok.
But only some radius and diameter dimensions are red.... and I create dimensions only on 3D geometry and not automatically
I run on V5R9
and i resolve this problem....
when i turn off icon
"display the various types of dimensions in different and customizable colors" all is ok.
But only some radius and diameter dimensions are red.... and I create dimensions only on 3D geometry and not automatically
- Status
Similar threads
- Question