Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Good morning We use ASPEN 7.3, a

Status
Not open for further replies.

djdavedave

Mechanical
Dec 13, 2010
4
Good morning

We use ASPEN 7.3, and we need to design a condenser for petrol unit, our customer, give all the inlet flow to the condenser (steam, nitrogen, hydrogen...), but I don't kwow , how we must to put the data, when he give only the gas nominal boiling point (NBP:88)(NBP:100)....

can you explain what is the solution for ASPEN, to include these data, in the software


Thanks
 
Replies continue below

Recommended for you

Has your customer given you stream compositions? Do you have the true vapor pressure (TVP) curve?
 
no , our customer give only the gas nominal boiling point, he didn't give the TVP

thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor