Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

good magnetic material with low magnetisation

Status
Not open for further replies.

alansimpson

Mechanical
Joined
Jul 8, 2000
Messages
228
Location
IE
I need a material that displays good magnetic attraction to permanent magnets but will resist becoming permanently magnetised. Nothing too exotic. I assume some type of ferrous material.
 
Soft iron is even better - this is often used as a core on electromagnets, as it loses is magnetism very quickly.
 
Hi Alansimpson,
In the 70's Western Electric had determined that AISI C1008 steel or steel with equal or less points carbon was satisfactory for DC relay frames and cores compared to soft iron used previously for the same construction. In other words, the residual magnetism of this form of steel compared sufficiently favorable to residual magenetism of soft iron for their applications. More exotic but higher performance materials would include mumetal, a nickel iron alloy, and some others.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top