Could you suggest a good adhesive for bonding polyamide PA66 to an aluminum block? The assembly should hold relatively high static loads under ambient conditions. As the bonding area is not large, I am looking for material with 10-15MPa shear strength and having a problem with this. The adhesives I have found have typically the strength about 3-5MPa. Thanks for advice.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!