Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gland Condensers

Status
Not open for further replies.
SENGUTTUVAN

SENGUTTUVAN

Mechanical
Joined
Jan 30, 2002
Messages
82
Location
IN
In a turbomachinery , for gland seal condensers do we need to provide vapour and liquid space in the exhanger shell?

With steam and air temperature of 245 deg C and cooling water temperature of 32 deg C , is it advisable to go in for fixed tube sheet design?

 
Status
Not open for further replies.

Similar threads

D
I need a Class 1 division 1 approved cable gland for both USA and Canada. And at the end of the cable there is a Molex connector.
Replies
0
Views
1K
denuwan
D
RDelaCourt513
  • Locked
  • Question Question
Radial O-Ring seal Gland chamfer
Replies
6
Views
872
RDelaCourt513
RDelaCourt513
Ryan Goffena
  • Locked
  • Question Question
Gland seal causing Steam Turbine generator to roll under vacuum
Replies
3
Views
386
byrdj
byrdj
elham02
  • Locked
  • Question Question
ASME U Stamp for Vacuum operated Steam Surface Condensers
Replies
2
Views
157
elham02
elham02
PULAOKHAO
  • Locked
  • Question Question
Any drawback to a very smooth O-ring gland for static gaseous system?
Replies
7
Views
216
HDS
HDS

Part and Inventory Search

Sponsor

Back
Top