Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Get the XY-Plane of Specified CSYS NX

Status
Not open for further replies.
Pitar1

Pitar1

Mechanical
Joined
May 14, 2021
Messages
4
Location
DE
Hello,
I am wondering if it is possible to get the xy Plane as datum plane of a specified CSYS in NX with Block UI Styler
I need the plane to measure some angles in an assembly.
Would be great if someone could help me.
Thanks in advance
 
Sort by date Sort by votes
In the thread linked above, there are 2 ways to get the component parts of a datum csys. I have some code somewhere that sorts out the components and allows quick access to the individual parts (X axis, YZ plane, etc). I can dig that out if it is of interest.

www.nxjournaling.com
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ppap eroni
  • Locked
  • Question Question
journal that moves in the xy plane
Replies
5
Views
6K
ppap eroni
ppap eroni
CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N
G
  • Question Question
NX Journal
Replies
15
Views
28K
Toost
Toost
CAD2015
  • Question Question
NX X.....................
Replies
9
Views
2K
DrPriest
DrPriest
CAD2015
  • Locked
  • Question Question
Plane erase/delete depended.....
Replies
6
Views
3K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top