Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Get Stored Material Data

Status
Not open for further replies.
trough57

trough57

Aerospace
Joined
May 9, 2005
Messages
5
Location
US
I'm writing a script to run in batch mode. I need to create a new material model based on an existing linear material model that's in the database. I know the existing model will have as a minimum EX(linear isotropic),NUXY,ALPX(secant-iso), and DENS defined at various temperatures but I don't know the temperature range or increment. How can I get these existing properties exactly as they are stored in the database? (Ansys 8.1)

Todd
 
Status
Not open for further replies.

Similar threads

W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
Faraz1997
  • Locked
  • Question Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
1K
NRP99
NRP99
Eranho
  • Locked
  • Question Question
How to get Circle centers from Named selection group 2023R2 Discovery/Spaceclaim
Replies
0
Views
414
Eranho
Eranho
andradesilva
  • Locked
  • Question Question
How to export to a text file results of analysis with material non-linearities, for all the substeps
Replies
0
Views
440
andradesilva
andradesilva
md_salem
  • Locked
  • Question Question
how to assign material to auto-generated body in ANSYS 22R1 workbench ?
Replies
1
Views
540
jkupka84
jkupka84

Part and Inventory Search

Sponsor

Back
Top