Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gentlemen 1

Status
Not open for further replies.
Lovison

Lovison

Mechanical
Joined
Jan 25, 2002
Messages
92
Location
US
If 316SS has a k of 0.0000090 @ +500 Deg. F what
would the k be at -500 Deg. F. Are there any
charts covering such materials and cold values
relating to the coefficient of materials? Wayne E. Lovison
service-parts@naglepumps.com
 
Sort by date Sort by votes
Impossible -- It is less than absolute zero <nbucska@pcperipherals.com>
 
Upvote 0 Downvote
Yes I'be told ABZ is -469 max. I just picked a random number without thinking (shame on me).

Use -300 Deg. F and acceptable my apologies.

What I want to see is if k (contraction/reduction applies)rather than expansion (thermal) and how to determine the value for the cold reduction.

Wayne E. Lovison
service-parts@naglepumps.com
 
Upvote 0 Downvote
Lovison, when you've worked it out from the NIST site perhaps you could publish the data as a FAQ!!
B
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top