We have recently come across some cracking of our epoxy/glass/nomex winding slot liner/insulation about 2" beyond the core out in the area normally covered by end caps. Does anyone out there have any experience with doing local repairs to the cracked insulation to avoid having to remove the winding and replace the entire slot liner which runs the entire length of the rotor?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!