Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Generating model from text

Status
Not open for further replies.
Settler

Settler

Structural
Joined
May 22, 2010
Messages
88
Location
US
Hello all,

I would like to define my model geometry from a series of point.

Assuming that I have a cube (2x2x2) between two rigid surfaces (3x3) which is being compressed is there any relatively short way to describe this problem as an input for ABAQUS?

I want to generate a lot of .txt files with various dimensions and loads so this will be extremely useful.

I cannot find any tutorial that doesn't involve python scripting? Any insight? Thanks!
 
Sort by date Sort by votes
Look at your online Abaqus Example Problems Manual. You'll find plenty of .inp files there as examples.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
Oluwakay
  • Locked
  • Question Question
error message from abaqus.
Replies
3
Views
2K
FEA way
FEA way
Saks1235
  • Locked
  • Question Question
ABAQUS:- Problem with Concentrated AM model Vs Goldak AM model
Replies
5
Views
2K
FEA way
FEA way
mj345
  • Locked
  • Question Question
Select edges from a selected cell
Replies
1
Views
2K
FEA way
FEA way
E
  • Locked
  • Question Question
ABAQUS IS NOT RUNNING THE MODEL
Replies
3
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top