Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

generaate a part from another

Status
Not open for further replies.
Sort by date Sort by votes
Copy the part using the part manager.

 
Upvote 0 Downvote
THANKS corus for your response but you did not understand my question i need to generate as showed in attached a part similar to a shell from a solid they have not the same geometry but for my cas they have the same shape when i would like to make one part to the other i hope you understand me
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Locked
Abaqus: transferring solution field from one instance to another between steps within same analysis.
Replies
2
Views
4K
Ron_ron
R
P
  • Locked
Information about Mapping Stress from one simulation result to another geometry ( which is a trimmed version of previous geometry)
Replies
2
Views
2K
FEA way
FEA way
mj345
  • Locked
  • Question Question
Select edges from a selected cell
Replies
1
Views
2K
FEA way
FEA way
swahlgren
  • Question Question
Splitting part while keeping mesh
Replies
2
Views
14K
swahlgren
swahlgren
Oluwakay
  • Locked
  • Question Question
error message from abaqus.
Replies
3
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top