Gear Macro

[KillABeeZ]

I was wondering if there is a gear macro availabe fror Pro/E? I can't seem to find one at their website and I really don't want to make all of them by hand.

Thanks in advance,
Paul
FIRST Robotics Team 33

 

[mjcole]

I have a trailfile somewhere that makes a gear but it's not parametric and you have to modify the parameters to get different sizes and number of teeth.

You might want to create a Trailfile that makes a gear and then run it from Pro/E.

Also you might want to check out the website listed below

http://www.pro-stuff.net/

You might find a Trail or
Mapkey "macro" that will be useful

Michael

 

[mjcole]

Go to this address for the Parametrically driven Involute Gear Part.

http://www.pro-stuff.net/cgi-bin/db...10&sb=---&so=ascend&view_records=View+Records

This will probably be the best solution to your gear needs

Michael

 

[albresco]

You could try:

http://www.geartechnology.com/mag/gt-model.htm

Doug