GE-fanuc (proficy machine edition)

[gasser72]

Dear guys,
I am using Proficy (GE-Fanuc) machine edition, is their any way to download the program from the PLC CPU if u don't have a copy from the program in your PC and make the logic and the confg. equal.
Before I was using Logic master 90 (GE-Fanuc), the software was auto detect the program name in the PLC and auto verifying the logic and the config. and by downloading the program from the PLC u can make it equal.
Regards
Gasser

 

[dV8r]

There is a way, but it can only be done by first 'uplaod' from the PLC, then 'Download' to the PLC. This can only be done if the program in the PLC was put in there with VersaPro or Proficy(Cimplicity) ME. If it was stored in the PLC with LogicMaster you will need to take it out with LogicMaster or VersaPro, save to disk then Import into PME.
The better way to do this is to "Import" the LogicMaster or VersaPro project into Proficy ME first or you will not get any documentation with it.