GD&T help

[Koror]

Hello,

I need to know how to use GD&T to dimension a shaft(R=5, L=14) assuming two cases:

1) it will be mating inside a cylinder(already dimensioned and tolerenced)
2) it will not be mating with anything

Can anyone give me a general overview of what tolerencing I need for both cases?

Thanks

K

 

[ewh]

I would start with runout. Try the GD&T forum for better response.

 

[ctopher]

That is what I would use, too.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP2.0 / PDMWorks 05
ctopher's home site
FAQ371-376
FAQ559-1100
FAQ559-1091
FAQ559-716