Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gasket material (ANSI B16.47 #150 flange)

Status
Not open for further replies.
Mboundi

Mboundi

Mechanical
Joined
Jul 28, 2008
Messages
21
Location
IT
Hi,
what is the material to be used for the sheet gasket of a #150 28" flange (ANSI B16.47 Series A)? What is the reference standard for the gasket material?
 
Sort by date Sort by votes
What is the fluid; and at what pressure and temperature? Determine the gasket material compatibility with the fluid.
 
Upvote 0 Downvote
Fluid is sea water without overpressure (1 bar).
I know that there are a lot of materials suitable for the same application. But i don't know what is the best choice and the relative standard (if any).
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

C
  • Question Question
ID Overlap between the gasket and the raised face flange
Replies
4
Views
600
cheezypuff
C
rudiawan .
  • Locked
  • Question Question
maximum pressure for hydrotest piping which has flange 150#
Replies
3
Views
3K
pierreick
pierreick
Shahpar
  • Question Question
Ring Joint Flanges for 38 inch and larger size as per ASME B16.47 Series A
Replies
1
Views
3K
GD2
GD2
J
  • Locked
  • Question Question
High Temperature Gasket Torque
Replies
8
Views
8K
TugboatEng
TugboatEng
W
  • Locked
  • Question Question
Leaking gasket joint
Replies
4
Views
1K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top