Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gas Wells/Reservoir Halite Issues

Status
Not open for further replies.

daviwy

Mechanical
Joined
Oct 14, 2008
Messages
49
Location
NG
I am currently looking into how I can tackle the halite issues we are experiencing with our wells. A lot of them have salt build up just before the SSSV.

We've been trying water washing for a while and that used to work. Now it seems like it is having no effect. We operate at relatively low pressures and would like to see if anyone here has experience or advice on how to tackle this issue.

Mechanical & Operations Engineer
Oil, Gas & Power
 
You need to know your the salt composition to know how to solve it. What changed?
 
we've put cameras in the well and we know the salt is fully soluble in water.

I wasn't here from the start of the issue but from what I've gathered nothing's changed but for the build up gradaully sits towards the lower end of the well.

The only thing i know that's changed really is the reservoir flow rate and pressure. i.e. lower pressure and low enough velocity to allow for the build up.

Mechanical & Operations Engineer
Oil, Gas & Power
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top