Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gas filtering

Status
Not open for further replies.

Zoobie

Chemical
Joined
Oct 22, 2002
Messages
193
Location
CA
I am trying to track down a long-chain hydrocarbon contamination problem in a gas stream (it is contaminating one of my mole sieve beds). What devices/technologies are out there that could be used to sample a dry gas stream to collect and measure contaminants (oils). We have used millipore tests in the past but due to the low contaminant levels a quantitative analysis could not be conducted.

Thx.
 
Just one question:

Does yout distribution network include underground storages? I know that in Denmark (where i come from) there has been reported problems with a substance injected in the UGS (a kind of polymer) then later found in the gas pipes as a residue.

Best regards

Morten
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top