Guest
I have had a lot of trouble finding any material properties info on galvanized steel. I also would like any info on galvanized tubular steel or galvanized steel extrusions. I would appreciate any advice, thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
The galvanising process does not change the base metal properties. Piping will be supplied to US or British Standards usually to Grade 200 MPa Yield Strength. Rolled platework will also come in nominal 200 MPa Yield.
If you need anything more specific than that you may need to do a tensile test on a sample, or contact the Steel Supplier.
If you need anything more specific than that you may need to do a tensile test on a sample, or contact the Steel Supplier.
Two sources which may help are:
American Galvanizers Association
Properties of materials
American Galvanizers Association
Properties of materials
- Status
Similar threads
- Locked
- Question
- Locked
- Question