SondrupJoe
Nuclear
What are the probabilities of having "Galvanic Corrosion" occur when using galvanized ASTM A-36 material with ASTM 300 series stainless steel?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Galvanic Corrosion Potential 2
- Thread starter SondrupJoe
- Start date
- Status
-
1
- #2
EdStainless
Materials
Under what conditions? It is realted to the electrical conductivity of your electrolyte. If this is atmospheric exposure you should be fine. If this will be wet it may a different situation.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
-
1
- #3
- Thread starter
- #4
SondrupJoe
Nuclear
the use is for companion angle flanges on ductwork. There are potential issues with humidity.
- Status
Similar threads
- Locked
- Question
- Locked
- Question