Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Galvanic Corrosion between A7050 and A2024 and A7075

Status
Not open for further replies.
iamchoyh

iamchoyh

New member
Joined
Jan 26, 2001
Messages
6
Location
KR
Hi..

I was searching the galvanic table from Mil-Std-889.
But, there are no information of the other al-alloy.
(ex:A7050...)
If I select the other al-alloy, Is it safe?
I don't think like that...
and There isn't showing the effect of heat-treat...

I need the informations...

Thank a lot.
 
Status
Not open for further replies.

Similar threads

mechdude777
  • Locked
  • Question Question
Galvanic Corrosion Between Alloy 800 and 825 Weld
Replies
1
Views
417
EdStainless
EdStainless
EngTipsAccount1234
  • Locked
  • Question Question
Connecting a stainless steel plate to a carbon steel bushing to avoid galvanic corrosion
Replies
11
Views
7K
mfgenggear
mfgenggear
V
  • Question Question
Bolts and Nuts for High-Temperature Applications – Ambiguities in European Standards
Replies
13
Views
7K
WKTaylor
WKTaylor
efulm4444
  • Question Question
6061-T6 in contact with CF8M Corrosion Concerns
Replies
3
Views
5K
WKTaylor
WKTaylor
Johnwoo1991
  • Locked
  • Question Question
A182 F9 and F91 metallurgical differences
Replies
6
Views
3K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top