Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Galling resistance of stainless steels

Status
Not open for further replies.
rprovost

rprovost

Aerospace
May 9, 2000
1
What manufacturers provide off the shelf stainless steel fasteners that are gall resistance.  eg CRES 316 hex screw and CRES 416 nut, or 'Gall-Tough' combo's (16Cr-8Ni-4Si-8Mn alloy)
 
Status
Not open for further replies.

Similar threads

rollingcloud
  • Locked
  • Question
What's the main cause for incomplete silver brazing on stainless steels?
Replies
11
Views
3K
TugboatEng
TugboatEng
mrmalcolm
  • Locked
  • Question
Welding Procedure Qualification Standards for Stainless Steel for corrosion resistance service
Replies
7
Views
797
EdStainless
EdStainless
MRondini
  • Locked
  • Question
Welding Stainless Steel 310 to 316L
Replies
3
Views
1K
EdStainless
EdStainless
Gears6580
  • Locked
  • Question
Welding SS2205 - Duplex Stainless steel to 316L 1
Replies
9
Views
2K
dik
dik
metaleng123
  • Locked
  • Question
Effect on mechanical properties of welding stainless steel without gas purge
Replies
4
Views
550
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top Bottom