.\fworks\fworks.dll problem 4

[Ripper2009]

Hello again all!!

While trying to bring up the FeatureWorks addin, I get this error message saying that the .\fworks\fworks.dll is missing. Can this .dll file be copied and pasted back into the file, and if so, how? I researched online and one source stated that this .dll cannot be reloaded because there is a MSGBOX feature missing.

Any suggestions?

Thanks in advance!!

Thanks,

Rip


SolidWorks 2007
SP 4.0

 

[JMirisola]

If your install of SolidWorks is local, try doing a repair on it. If it's off of an Admin Image, are other users experiencing the same problem? If so, then try a repair on the Admin Image.

Jeff Mirisola, CSWP

http://designsmarter.typepad.com/jeffs_blog

 

[SBaugh]

Search the SW knowledge base its possible that *.dll has not been registered to in your windows registry.

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"
faq731-376

 

[rfus]

regsrv the DLL in that directory. through cmd.
 
cd to "\fworks" in cmd
[copy and paste this in] 
for %f in (*.dll) do regsvr32 %f    [press enter]

 

[CorBlimeyLimey]

FeatureWorks is only included in the Professional and Premium editions? If you only have the basic edition of SolidWorks you are SOL.

 

[Ripper2009]

Thanks to ALL!!

Thanks,

Rip


SolidWorks 2007
SP 4.0