I have a pyrotechnic device that will ultimately have to function under saltwater. As part of the environment test plan, I intend to function the device immersed in x depth of saltwater to demonstrate it's capability. I am wondering if there is a specification that anyone has come across that lays out a test plan for functioning a device immersed in salt water. I have already seen the Mil-spec-810 tests regarding fording and those aren't adequate. I will simply function the device under salt water if I cannot find a specification but it would be more appealing to say we have demonstrated our device to function under salt water IAW spec ........... Any thoughts?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Function immeresed in Salt Water Specification
- Thread starter SpecB07
- Start date
btrueblood
Mechanical
Mil-Std-810 includes an immersion test, method 512, in which the use of saturated salt water is included as a possible test fluid.
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Locked
- Question