Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Full pen column splicing, fitup/misalignment spec? D1.1...

Status
Not open for further replies.
Boogerweldz

Boogerweldz

Structural
Joined
Jul 15, 2013
Messages
2
Location
US
hi. Splicing 80' columns for a multistory building using two 40' sections. During fitup the Web and flanges dont, obviously, align perfectly. Is there a spec or percentage of misalignment allowed for fitup and full pen weld joint? These are w33x(i forget) columns. The web and flanges are 7/8" thick or so.

Sorry for the lack of details, im not at work.
 
Status
Not open for further replies.

Similar threads

JT0202
  • Question Question
AWS D1.1 2020 Group I to Group II Material PQR
Replies
0
Views
2K
JT0202
JT0202
ThaiVu
  • Locked
  • Question Question
AWS D1.1 - FILLET WELD BREAK TEST
Replies
7
Views
3K
ThaiVu
ThaiVu
JONI101
  • Locked
  • Question Question
AWS D1.1 : 10.25.2 - Tubular Connection Requirement (RT acceptance criteria)
Replies
0
Views
1K
JONI101
JONI101
andyecho
  • Locked
  • Question Question
UK fabricator first D1.1 welding job
Replies
0
Views
880
andyecho
andyecho
mr_inspectorpants
  • Locked
  • Question Question
AWS D1.1 Prequalified Essential Variables
Replies
3
Views
3K
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top