Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

frp and solid185

Status
Not open for further replies.
RJcivileng

RJcivileng

Structural
Joined
May 16, 2012
Messages
16
Location
TR
hi all
i am using solid185 to model frp
but how can i enter the failure criteria "tsai-wu" for this element?
what parameters should i enter.....and should i enter the failure criteria before or after i do the analyze .
thanks
 
Status
Not open for further replies.

Similar threads

Ahmed_abdelgawad
  • Question Question
CDB and ‘prnsol,s’
Replies
0
Views
6K
Ahmed_abdelgawad
Ahmed_abdelgawad
W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
627
vsw
V
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
2K
IJR
IJR
LIAM_7
  • Locked
  • Question Question
ANSYS and fatigue analysis
Replies
0
Views
459
LIAM_7
LIAM_7

Part and Inventory Search

Sponsor

Back
Top