Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

From a point of view

Status
Not open for further replies.

jerry1423

Mechanical
Joined
Aug 19, 2005
Messages
3,428
Location
US
Several years ago I saw a demonstration on how NX can show an operators point of view, such as from the drivers seat inside an excavator.
I also believe there is a John Baker video on YouTube demonstrating this, but I cannot locate it.
Does anybody know what NX calls this, so I can find it ?

Jerry J.
UGV5-NX1899
 
it was very similar to that . . . maybe I was dreaming here.
I will go into Fly-Though and see if I can find it form there.

Jerry J.
UGV5-NX1899
 
Search for something called the 'Eye Point'. It only works if you're a 'Perspective' mode. There's an option to define things as if you using a camera.

John R. Baker, P.E. (ret)
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top