Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IRstuff on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Friction and Wear Testing

Status
Not open for further replies.
OptiEng

OptiEng

Mechanical
Oct 30, 2009
149
Hello All,

I wondered if anyone out there works or researchers in the field of Tribology. I am started researching the topic and have started using a Plint Tribology TE53 Friction and Wear Tester. This is essentially twin discs rotating or one stationary in contact and using a assess wear.

Anyone with any experience of this field, testing or using this equipment?

Many Thanks

OptiEng.
 
Status
Not open for further replies.

Similar threads

F
Minimum requirements mechanical testing of SA105 forgings
Replies
3
Views
8K
David3399
D
Kabootarman
  • Locked
  • Question
API 5L linepipe Impact Testing
Replies
7
Views
815
SJones
SJones
K
  • Question
White liquor and steel 316
Replies
1
Views
2K
lucky-guesser
lucky-guesser
tk90
  • Question
4140, Surface Hardness, and Coatings
Replies
12
Views
8K
mfgenggear
mfgenggear
TMcRally
  • Locked
  • Question
420, 303, and 304 SS and stray current failures 2
Replies
12
Views
1K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom