Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Frequency of Inspections

Status
Not open for further replies.

olnufk

Electrical
Joined
Jun 19, 2006
Messages
1
Location
GB
Is there a recognized frequency for inspection and testing of hazardous areas.
 
What are you talking about? What equipment? What location?

Requirements exist for pressure safety relief valves.

Offshore platforms require regular testing of shutdown devices.

Operations test for combustible or toxic gas before issueing an entry or fire permit.

...
 
You'll need to clarify for us to try to help.

I'm going to assume that you're interested in frequency of testing/inspecting electrical equipment.

You can find a recommendation testing/inspection intervals in NFPA 70B.

______________________________________________________________________________
This is normally the space where people post something insightful.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top