Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Freeze wave link w/out wave license

Status
Not open for further replies.

Berserk

Automotive
Jan 23, 2003
248
Hello,

Is it possible to freeze wave linked geometries without a wave license?
I am using GM TCE and when I run checkmate, I have files that fails due to unfrozen wave links.

Thanks!

NX11 / Windows 10

UGNX 9.0.2.5 MP1 - Windows 7 64bit
Productive Design Services
 
Replies continue below

Recommended for you

The basic modeling license gives you access to create/edit links; but an advanced wave license is needed to freeze/unfreeze links.

www.nxjournaling.com
 
You could also try breaking the associative like between the waved part & the parent model.

Double click the Linked Body in the Part Navigator.
Expand the WAVE Geometry Linker by selecting the down arrow at the bottom.
Expand the Settings box & uncheck the Associative tick box.

"It is impossible to make anything foolproof because fools are so ingenious."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor