Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Free Body

Status
Not open for further replies.
Capko

Capko

New member
Joined
Feb 16, 2016
Messages
25
Location
FR
Hello,

I’m trying to find the free body loads of a beam but when I do a simple verification the results are not OK.

What I obtain from hand-made calculs are not the same as FEM show me.

For example, I should obtain a moment of 5.0E3 and in FEM I obtain 4.385E3.

why?
 
Sort by date Sort by votes
I have my beam that should have a moment of 7.5e3 et now I obtain 6.0e3 in FEM. Does anyone knows what's happening?

I have already checked the reference system, the point and lever-arm are both OK...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question Question
Concentrated Force on a Rigid body reference point
Replies
2
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
A
  • Locked
  • Question Question
ABAQUS: Does abaqus transform density in body force?
Replies
2
Views
2K
FEA way
FEA way
TwiceYTPL
  • Locked
  • Question Question
Need Help Removing Rigid Body Constraints in Abaqus
Replies
3
Views
833
FEA way
FEA way
han_cyuan
  • Locked
  • Question Question
abaqus natural free vibration
Replies
1
Views
274
FEA way
FEA way
liq001
  • Locked
  • Question Question
switch rigid body on and off between steps
Replies
16
Views
1K
liq001
liq001

Part and Inventory Search

Sponsor

Back
Top