Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Franki Pile Design 1

Status
Not open for further replies.

Jalthi

Geotechnical
Joined
Aug 20, 2009
Messages
41
Location
US
I would like to have some reference material for franki pile design. If you can show me where to find them it would be greatful. So far, I could locate only one paper by William J. Neely "Bearing Capacity of Expanded Base Piles in Sand" (1989). I know there is one more paper by Rey Nordlund (1970), but do not know where to find it. Thanks.
 
Conference on Design and Installation of Pile Foundations and Cellular Structures, Lehigh University, April, 1970.
 
There was a publication "Pile Tips" where one month's article also discussed and gave a chart for "capacity vs volume of concrete extruded." I have it in deep storage so not able to provide.
 
I am not sure, but you may found something in the Driven Manual. You may download it free from FHWA webpage.
 
For info about Franki piles, call Alan Watka at G. Donaldson Construction (a division of Hayward Baker) in Cumberland, Rhode Island.
 
Again, call Alan Watka. He recently sent me design info on Franki piles. He also would probably be interested in bidding the project.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top