Hi, I have created a simple mitered frame (see attachment), now then what I want to do is place a workplane midway thru upper section, what i thought the best was to edit that section, expand in the browser click on endplane to find what the parameter is in this case its d14, ok so i make this visible, then go to create new plane from endplane and type in d14/2 which i thought would put this in the mid point, therefore if i change my frame that workplane would remain on the center....not so d14 does not appear to be the overall length, so what is parameter d14 telling me? Thanks in advance
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Frame generator
- Thread starter cadmate
- Start date
Similar threads
