Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Forming Stretched Acrylic

Status
Not open for further replies.
staneja

staneja

Aerospace
Joined
Aug 2, 2002
Messages
2
Location
IN
Is it significantly more difficult to form stretched acrylic than cast acrylic. We are looking at vaccuum forming cast acrylic sheets and would now like to extend this process to stretched acrylic sheets
 
Status
Not open for further replies.

Similar threads

YossiD
  • Locked
  • Question Question
Acrylic=PMMA?
Replies
2
Views
1K
IRstuff
IRstuff
hhandoko
  • Locked
  • Question Question
Creating Colored PMMA/Acrylic For Color Matching
Replies
0
Views
871
hhandoko
hhandoko
mah1975
  • Locked
  • Question Question
Some bubbles get popped in the forming roller after extrusion of the bubble-wrap
Replies
1
Views
740
Mykolaj
Mykolaj
dogbural
  • Locked
  • Question Question
Acrylic tube (350mm x 5mm thick)
Replies
2
Views
322
MikeHalloran
MikeHalloran
TefCap
  • Locked
  • Question Question
Forming PTFE Tubing
Replies
1
Views
477
itsmoked
itsmoked

Part and Inventory Search

Sponsor

Back
Top