Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Former ESR (NER) GP I -joists

Status
Not open for further replies.
jim57

jim57

Structural
Joined
May 20, 2002
Messages
62
Location
US
looking for an old NER report from ICC (now ESRs). It is for a Georgia Pacific I-joist built around 1999. The label is GP Performance with the NER indicated as NER-OR357 or 397
If anyone has an old brochure, it would be greatly appreciated. They are 11-7/8 deep with 2x4 flanges
Thanks
 
Status
Not open for further replies.

Similar threads

G
  • Question Question
What standard is used for high-temperature pressure vessels in Europe?
Replies
4
Views
4K
GlassPowder
G
Ahmed Elarbagi
  • Question Question
FG Pressure limit inside buildings for oil & gas facilities
Replies
0
Views
3K
Ahmed Elarbagi
Ahmed Elarbagi
DRSM80
  • Locked
  • Question Question
What is needed to register Pressure Vessels in Brazil using European construction codes
Replies
1
Views
865
The Obturator
The Obturator
woodman1967
  • Locked
  • Question Question
When Window Glass is required to be Tempered
Replies
0
Views
671
woodman1967
woodman1967
hugo.c
  • Locked
  • Question Question
Outdoor 2000KVA dry-type transformer installation
Replies
2
Views
823
hugo.c
hugo.c

Part and Inventory Search

Sponsor

Back
Top