Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Formed Part (How to model?)

  • Thread starter Thread starter mbuller
  • Start date Start date
M

mbuller

Guest
Refer to Formed Part.JPG
I need guidance making the green part. I don't know how to make the feature circled in red.

Refer to Pic.JPG
The plate will be pressed against rods. Once pressed, the part will form around the rod.
 

Attachments

  • Formed Part.JPG
    Formed Part.JPG
    60.9 KB · Views: 7
  • Pic.JPG
    Pic.JPG
    43.4 KB · Views: 7
I would use a sweep feature to accomplish what I think you are trying to accomplish.
 

Part and Inventory Search

Sponsor

Back
Top