parhan
Mechanical
- Jul 3, 2012
- 2
for structure design for scrubber do i consider upset weight or operation weight
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
for structure design for scrubber d
- Thread starter parhan
- Start date
- Status
- Thread starter
- #2
If there is a building code applicable, you might check load combinations in it.
Typically, supports for gravity loading would be designed for the maximum load, including being filled with liquid if that is a possibility. Seismic loads would be based on operating weight, not maximum weight. But details could vary.
Typically, supports for gravity loading would be designed for the maximum load, including being filled with liquid if that is a possibility. Seismic loads would be based on operating weight, not maximum weight. But details could vary.
- Status
Similar threads
- Locked
- Question
