Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Footing Depth for Concrete Slab Building 1

Status
Not open for further replies.

tatkhj

Civil/Environmental
Joined
Sep 5, 2018
Messages
2
Location
US
I'm preparing plans for a 16' x 65' x 14' high prefab building in Placitas NM.
What is the appropriate footing depth for my concrete slab in this location with it's milder winters and ~6000' elevation.
I'm new to the area and have previously worked in Illinois where the frostline is ~3' minimum and winters are bitter cold.

Thanks,
tatkhj
 
Frost depth in Albuquerque is 16 inches. You should consult the Town or a local engineer to confirm if that's adequate.
 
Thanks. Will do.
 
Quite a ways from the border, so you should not have to worry about any tunnels.

Mike McCann, PE, SE (WA)


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top