Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flyout design tree

Status
Not open for further replies.
frogsaregreen

frogsaregreen

Mechanical
Joined
Apr 11, 2003
Messages
16
Location
US
The flyout design tree can be expanded and retracted by press the letter "c"
 
Thanks for the Tip frogsaregreen!

Regards,

Scott Baugh, CSWP [borg2]
CSWP.jpg

faq731-376
 
Try Clicking on the Expand (+) while hitting C on your keyboard, it compacts the scroll bar so you can scroll with the tree compacted.
 
Click and hold the LMB on expand while hitting C (sorry bout the last post).
 
Status
Not open for further replies.

Similar threads

borsht
  • Question Question
Hole Wizard is moving sketch outside of feature in tree
Replies
14
Views
8K
Gupta65
Gupta65
CAD2015
  • Question Question
Electrical Harness Design..............
Replies
4
Views
6K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
Solid Works -Electrical design
Replies
8
Views
681
SBaugh
SBaugh
M
CAD design for P51 Mustang Replica !
Replies
0
Views
2K
marian32
M
SBaugh
  • Locked
  • Question Question
Macro - Tree Display
Replies
4
Views
660
SBaugh
SBaugh

Part and Inventory Search

Sponsor

Back
Top