Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fluid Flow - Water Blowdown

Status
Not open for further replies.
bucs2047

bucs2047

Mechanical
Joined
Nov 8, 2003
Messages
20
Location
US
Can I calculate an actual flushing flow rate with a trend peak shape from an OS?

Assuming the peak as a triangle and measuring the duration in minutes between distance and top, then multiplying base line and peak to find a volumetric flow rate – g.p.m.

I’m trying to capture the flow during a process sequence.

Thanks
Bucs
 
Status
Not open for further replies.

Similar threads

JoeBobJenkins
  • Question Question
What causes PRV blowdown?
Replies
4
Views
2K
LittleInch
LittleInch
A
  • Locked
  • Question Question
Fluid Dynamics
Replies
2
Views
1K
LittleInch
LittleInch
Mahmoud Khalaf
  • Locked
  • Question Question
Fluid mechanics
Replies
1
Views
424
1503-44
1503-44
Mark_B
  • Locked
  • Question Question
Calculating flow through (heating water) coil given only pressure drop and coil measurements
2
Replies
20
Views
13K
LittleInch
LittleInch
swazimatt
  • Question Question
pumped flow creating negative pressures to eliminate small pump
Replies
11
Views
2K
Hartley Kingon
Hartley Kingon

Part and Inventory Search

Sponsor

Back
Top