Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FLUID COUPLING's 1

Status
Not open for further replies.
fixo

fixo

Computer
Joined
Sep 17, 2008
Messages
26
Location
AR
Normally the FLUID COUPLING's are fill with oil or other suited liquid.
But also there are ones filled with small solid particles , the same used to shoot penning.
It is used to link an AC asynchronous motor rated 440 Kw @ 740 rpm , to a hammer mill in a Cement plant
Do you know any about it , mainly what is the generic name of such device so I can do a search?
I can not find it.
Thanks.

 
Sort by date Sort by votes
Dry fluid centrifugal clutch.
I first encountered them on large mixing equipment where they allowed a heavily loaded rotating drum to start turning.

Griffy
 
Upvote 0 Downvote
Hi Griffengm.
Thanks for your answer.
Seem to be the same I have.

Do you remember the brand name?

I can not find it by searching at the web.

 
Upvote 0 Downvote
I found it .

Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top