Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fluid cavity reference point ABAQUS

Status
Not open for further replies.
Hari_Magara

Hari_Magara

Civil/Environmental
Joined
Feb 7, 2018
Messages
1
Location
AU
Hi can some one please help me how to create a cavity reference point for fluid cavity definition in abaqus. I keep getting this error Only degrees of freedom 11 and above can be active in the model for this procedure. Check the procedure and element types used in this model.
thread799-384267
 
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question Question
Concentrated Force on a Rigid body reference point
Replies
2
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
mj345
  • Locked
  • Question Question
Importing point co ordinates in ABAQUS
Replies
1
Views
2K
FEA way
FEA way
Pam Crash
  • Solved
Fluid filled structure: Implicit transient *Dynamic analysis possible with ABaqus-Standard
Replies
6
Views
7K
jball1
jball1
S
  • Question Question
SPH Fluid Damping — How to Set Artificial Viscosity and Bulk Coefficients for Water vs PDMS in Abaqus/Explicit?
Replies
2
Views
3K
stevekoja
S
I
  • Question Question
Abaqus Subroutine: Gapelectr
Replies
0
Views
3K
IbrahimK
I

Part and Inventory Search

Sponsor

Back
Top