Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fluid Cat Cracker @ 1,400F - CrC HVOF embrittlement - Spray and Fuse

Status
Not open for further replies.

Luxeal

Mechanical
Joined
Nov 20, 2010
Messages
10
Location
CA

I learned the hard way that HVOF-Cr3C2 can embritteled when exposed to 1,400F. Embrittlement leads to hardness increase, crack propagation and coating failure.

Customer suggests to switch from HVOF-Cr3C2 to NiCrB Spray-and-Fuse (C88). Does somebody experienced SF C88 at 1,400F? Knowing hardness and galling resistance at this temperature could be a good start.

Any other coating suggestion for such an application?

Luxeal
 
hi hsbcn,

300 class - 50psi



Luxeal
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top