sw71im
Petroleum
- Aug 29, 2008
- 17
Folks,
I am doing small piece of work on Riser Replacement assessing the feasibility of wet storing the risers for a minimum of 3 months before the FPSO arrives on site. The carcass material is 316L which is generally unsuitable for wet storage. It has been proposed that this can be mitigated by sealing the risers with corrosion inhibitor.
Can anyone provide any guidance on this please
I am doing small piece of work on Riser Replacement assessing the feasibility of wet storing the risers for a minimum of 3 months before the FPSO arrives on site. The carcass material is 316L which is generally unsuitable for wet storage. It has been proposed that this can be mitigated by sealing the risers with corrosion inhibitor.
Can anyone provide any guidance on this please
