Jan 26, 2015 #1 Mick15 Civil/Environmental Joined Jan 23, 2015 Messages 6 Location GB what effect omitting the anchors would have on the desired length and strength of the sheet piles? Regards Mike
what effect omitting the anchors would have on the desired length and strength of the sheet piles? Regards Mike
Jan 26, 2015 Thread starter #2 Mick15 Civil/Environmental Joined Jan 23, 2015 Messages 6 Location GB Upvote 0 Downvote
Jan 26, 2015 #3 cvg Civil/Environmental Joined Dec 16, 1999 Messages 6,868 Location US a) much heavier sheet piles required or b) sheet piles fail Upvote 0 Downvote
Jan 26, 2015 #4 fattdad Geotechnical Joined Sep 7, 2006 Messages 2,790 Location US to develop the cantilever greater penetration depth would be required, which would result in an increase to the section modulus of the sheeting. Hope you get a good grade. . . f-d ípapß gordo ainÆt no madre flaca! Upvote 0 Downvote
to develop the cantilever greater penetration depth would be required, which would result in an increase to the section modulus of the sheeting. Hope you get a good grade. . . f-d ípapß gordo ainÆt no madre flaca!